CPS3/197DHF ATEX microwave enclosure for to be used in severe environments where presence of gas, vapor, dust, fiber, in hazardous area.
Do not install the detector on a surface exposed to strong vibrations. It must be installed on a wall or on a solid pole. If it is installed on a building with a metal surface, the support must be vibration-resistant.
Position the detector in such a way that its coverage stops on the ground in the required protection area. Do not forget that the device can detect a big object such as a lorry or bus at a distance of approximately . 150 meters.
Do not install the detector under eaves not fitted with a gutter. In case of heavy rain, the flow of water directly in front of the detector may trigger unwanted alarms.
The high-frequency antenna comprises a 24 GHz frequency transmitter (in K band) and a receiver with Doppler effect which detects signal variations caused by the passage of an object in the lobe. The association of these two technologies produces a reliable and high-performance solution by forming a non-physical light curtain or lobe (depending on sensor model).
Industry : Surface II
Environment : Gas
Environment : Dust
Protection type : EExd -
Gas : II C
Area : 1 2 21 22
Materials : Aluminium cast